Choose your model
Cree LED lights
Accessories
Accessories Accessories CO12780Product ID: 13058
Mandona
There are many variations of passages of Lorem Ipsum available, but the majority have suffered alteration in some form, by injected humour, or randomised words which don't look even slightly believable. If you are going to use a passage of Lorem Ipsum, you need to be sure there isn't anything embarrassing hidden in the middle of text.
Create an account to put this in your wishlist.
Go to wishlistCreate an account to put this in your wishlist.
Cree LED lights
Accessories
Accessories Accessories CO12780Product ID: 13058
Ships within 3-10 business days with 2 day shipping
Ships within 3-10 business days with 2 day shipping
Choose
your variation
4.6
(220 Google reviews)
40W CREE LED Lights:
Surface Mount Light which gives tons of adjustability up and down and side to side so fine tune your light spread
Available in Clear/white and Amber. (Clear/white is standard. For Amber lights, please leave a note in the order comments section. There is no extra charge)
Operating Voltage: 10-30V DC
Light output: 3800 lumen
Color temperature: 6000K/3000K
Operating temperature: -40°C~60°C
Beam Pattern: Spot
Material: Die cast aluminum housing with stainless steel bracket
Lens: Polycarbonate
Light Housing Dimensions: 3" tall x 3" wide x 2.75" deep (76 x 76 x 70mm)
24W CREE LED Lights:
Surface Mount Light which gives tons of adjustability up and down and side to side so fine tune your light spread
Available in Clear/white
Operating Voltage: 10-30V DC
Light output: 2300 lumenColor Temperature: 6000K
Operating temperature: -40°C~60°CBeam Pattern: Flood/ Spot combo (90/8 degree)
Material: Die cast aluminum housing with stainless steel bracketLens material: PMMA
Light Housing Dimensions: 3" tall x 3" wide x 2.75" deep (76 x 76 x 70mm)
Current draw: 3.3 @12V, 1.65A@24V
With Harness:
This option includes the lights, mounting bracket and all hardware, as well as a complete plug and play wiring harness to wire these into your vehicle on their own circuit. This includes the switch to mount in your interior, the relay, battery terminal connectors, wiring, and the industry standard waterproof DT plug waterproof connectors to easily disconnect each light (used by Rigid, Baja Designs, etc). All of the wiring and connectors are ready to go, so no soldering or splicing is required. The harness comes complete and ready to install. Please note that the wiring length is designed for front bumper installs, so rear bumper or roof rack light applications may require that you extend the wiring.
Without Harness:
This option includes the lights, mounting bracket and all hardware, as well as the industry standard waterproof DT plug waterproof connectors to easily disconnect each light (used by Rigid, Baja Designs, etc). This includes the female end and male end with an extra length of blank wire, which is not pictured. This option is recommended for easily splicing into your existing factory fog light circuit so you can operate the lights from your factory fog light switch. This also avoids the need to run any wiring through your engine bay or firewall.
Note:
We can also provide weld-on mounting tabs to mount these lights to your existing bumper or roof rack. These tabs are slotted for adjustability and available in either 3/16" steel or 1/4" aluminum. Please leave a note in the order comments section when placing your order and we will reach out to you to confirm.
Cree LED lights
Accessories Accessories
AUD$ 0.00Product ID: 13058
Product overview
40W CREE LED Lights:
Surface Mount Light which gives tons of adjustability up and down and side to side so fine tune your light spread
Available in Clear/white and Amber. (Clear/white is standard. For Amber lights, please leave a note in the order comments section. There is no extra charge)
Operating Voltage: 10-30V DC
Light output: 3800 lumen
Color temperature: 6000K/3000K
Operating temperature: -40°C~60°C
Beam Pattern: Spot
Material: Die cast aluminum housing with stainless steel bracket
Lens: Polycarbonate
Light Housing Dimensions: 3" tall x 3" wide x 2.75" deep (76 x 76 x 70mm)
24W CREE LED Lights:
Surface Mount Light which gives tons of adjustability up and down and side to side so fine tune your light spread
Available in Clear/white
Operating Voltage: 10-30V DC
Light output: 2300 lumenColor Temperature: 6000K
Operating temperature: -40°C~60°CBeam Pattern: Flood/ Spot combo (90/8 degree)
Material: Die cast aluminum housing with stainless steel bracketLens material: PMMA
Light Housing Dimensions: 3" tall x 3" wide x 2.75" deep (76 x 76 x 70mm)
Current draw: 3.3 @12V, 1.65A@24V
With Harness:
This option includes the lights, mounting bracket and all hardware, as well as a complete plug and play wiring harness to wire these into your vehicle on their own circuit. This includes the switch to mount in your interior, the relay, battery terminal connectors, wiring, and the industry standard waterproof DT plug waterproof connectors to easily disconnect each light (used by Rigid, Baja Designs, etc). All of the wiring and connectors are ready to go, so no soldering or splicing is required. The harness comes complete and ready to install. Please note that the wiring length is designed for front bumper installs, so rear bumper or roof rack light applications may require that you extend the wiring.
Without Harness:
This option includes the lights, mounting bracket and all hardware, as well as the industry standard waterproof DT plug waterproof connectors to easily disconnect each light (used by Rigid, Baja Designs, etc). This includes the female end and male end with an extra length of blank wire, which is not pictured. This option is recommended for easily splicing into your existing factory fog light circuit so you can operate the lights from your factory fog light switch. This also avoids the need to run any wiring through your engine bay or firewall.
Note:
We can also provide weld-on mounting tabs to mount these lights to your existing bumper or roof rack. These tabs are slotted for adjustability and available in either 3/16" steel or 1/4" aluminum. Please leave a note in the order comments section when placing your order and we will reach out to you to confirm.
Key specifications
40W CREE LED Lights:
Surface Mount Light which gives tons of adjustability up and down and side to side so fine tune your light spread
Available in Clear/white and Amber. (Clear/white is standard. For Amber lights, please leave a note in the order comments section. There is no extra charge)
Operating Voltage: 10-30V DC
Light output: 3800 lumen
Color temperature: 6000K/3000K
Operating temperature: -40°C~60°C
Beam Pattern: Spot
Material: Die cast aluminum housing with stainless steel bracket
Lens: Polycarbonate
Light Housing Dimensions: 3" tall x 3" wide x 2.75" deep (76 x 76 x 70mm)
24W CREE LED Lights:
Surface Mount Light which gives tons of adjustability up and down and side to side so fine tune your light spread
Available in Clear/white
Operating Voltage: 10-30V DC
Light output: 2300 lumenColor Temperature: 6000K
Operating temperature: -40°C~60°CBeam Pattern: Flood/ Spot combo (90/8 degree)
Material: Die cast aluminum housing with stainless steel bracketLens material: PMMA
Light Housing Dimensions: 3" tall x 3" wide x 2.75" deep (76 x 76 x 70mm)
Current draw: 3.3 @12V, 1.65A@24V
With Harness:
This option includes the lights, mounting bracket and all hardware, as well as a complete plug and play wiring harness to wire these into your vehicle on their own circuit. This includes the switch to mount in your interior, the relay, battery terminal connectors, wiring, and the industry standard waterproof DT plug waterproof connectors to easily disconnect each light (used by Rigid, Baja Designs, etc). All of the wiring and connectors are ready to go, so no soldering or splicing is required. The harness comes complete and ready to install. Please note that the wiring length is designed for front bumper installs, so rear bumper or roof rack light applications may require that you extend the wiring.
Without Harness:
This option includes the lights, mounting bracket and all hardware, as well as the industry standard waterproof DT plug waterproof connectors to easily disconnect each light (used by Rigid, Baja Designs, etc). This includes the female end and male end with an extra length of blank wire, which is not pictured. This option is recommended for easily splicing into your existing factory fog light circuit so you can operate the lights from your factory fog light switch. This also avoids the need to run any wiring through your engine bay or firewall.
Note:
We can also provide weld-on mounting tabs to mount these lights to your existing bumper or roof rack. These tabs are slotted for adjustability and available in either 3/16" steel or 1/4" aluminum. Please leave a note in the order comments section when placing your order and we will reach out to you to confirm.
Key specifications
-
David Beaudet
-
Phillip Miller (ZomBud)
-
Gerry B
-
Eric T
David Beaudet
Purchased a high clearance bumper kit for my son’s 2nd generation Tacoma. He had almost zero welding experience and thought this would be a great crash course. I am pleased to say I was right. The bumper came out great. The precision of the cuts made tacking it a piece of cake and all the external seam welds get ground smooth anyway, so it was a great place to work on his technique. I highly recommend this project for a great bumper as well as a great learning experience.
Phillip Miller (ZomBud)
Fantastic bumper, even for a novice welder. I really liked how all the pieces just fit together, and the locating tabs were also a big help. The one improvement I would make is to allow a little more room to access the inside of the bumper, or at least slightly larger access holes. Getting the license plate mounted was impossible for me, and the winch mount bolts were difficult. Aside from that, I love it!
Gerry B
The small shop that can AND DOES!!! A project type that always has challenges and no surprise I did. Bandon and the Coastal Offroad team were extremely supportive, service was excellent & responsive, and the product after several off-road excursions and a 10,000 km touring lap from Alberta down the entire Pacific Coast Hwy to Baja Mexico in the fall confirmed the bumpers performed to expectation!
Eric T
This company is top notch! They were fast and communicated throughout the whole process. The kit was perfect too… very happy with whole package and it turned out better than we thought!
looks like you are from [country]
Would you like to shop the [ca/US/NZ/AU] site ?
YES, TAKE ME TO THE [ca/US/NZ/AU] SITE
